The Technology Magazine.

Full width home advertisement

Android

Linux

Post Page Advertisement [Top]

Configure D-Link DIR-600L as Access Point

The Default Mode of D-Link DIR-600L is Router Mode. In Router Mode, The Router Releases DHCP to the clients to network.

I am going to explain how you can configure this router as an Access Point (AP).

first Log into the D-Link DIR-600 using ip http://192.168.0.1.




Click On Advanced 
The Default Wireless mode is Wireless Router. Select "Access Point" in this page under "wireless Network settings" to configure the Cloud router as Access point.

Please feel free to comment below if you have any questions.

2 comments:

  1. Worthless info. What you have given is already known. what is needed is configuration settings like IP, DHCP, port to which LAN cable is to be connected...

    ReplyDelete
    Replies
    1. Thanks for your opinion. I have published this just to show this model has the option to use it as "Access point", not just router. One difference is, the AP doesn't give its own DHCP, it will get the DHCP from another DHCP server in the network. This configuration is useful in larger networks where you have multiple APs and you want to track the IPs of your clients for Access control or access logs etc. All the deviced you get in the market doesn't support this option, since most of them are designed for home use

      Delete

Dear visitor,
Please do not post spam. All comments will be moderated before approval.

Bottom Ad [Post Page]

| Designed by Techeia.com