Skip to main content


Showing posts from January, 2016

Configure D-Link DIR-600L as Access Point

The Default Mode of D-Link DIR-600L is Router Mode. In Router Mode, The Router Releases DHCP to the clients to network.

I am going to explain how you can configure this router as an Access Point (AP).

first Log into the D-Link DIR-600 using ip

Click On Advanced  The Default Wireless mode is Wireless Router. Select "Access Point" in this page under "wireless Network settings" to configure the Cloud router as Access point.

Please feel free to comment below if you have any questions.

Configure Port Forwarding in ADSL router

Consider this scenario:
The remote office has a normal broadband connection with only one static ip address. You connected your VPN/router to the ADSL modem to make the network part of your VPN. Sometimes you may want to log into the router wnen the VPN is down. But the Public static ip only allows you to access the DSL modem.In this scenario you can use Port forwarding.

PORT FORWARDINGPort Forwarding allows you to direct incoming traffic from the WAN side (identified by Protocol and WAN port) to the internal server with a private IP address on the LAN side.

I am using D-link DSL-2730U to configure in this example.

 Select Usual Service Name ,and enter the LAN IP address and click "Apply Changes" to forward IP packets for this service to the specified server.

I configured port 220 at the WAN port since I already use the default port 22 to ssh to the ADSL router.
Please feel free to ask questions in the comment box if you need more details.