This article will help is you are trying to access the cisco switch using console cable/serial port using putty or any other application.
The settings are applicable for the following models:
| SF302-08PP | SG300-28 | SF500-24 | SG500X-24 |
| SF302-08MPP | SF300-48 | SF500-24P | SG500X-24P |
| SG300-10PP | SG300-20 | SF500-24MP | SG500X-24MPP |
| SG300-10MPP | SF302-08P | SF500-48 | SG500X-48 |
| SF300-24PP | SG300-52 | SF500-48P | SG500X-48P |
| SF300-48PP | SF300-24 | SF500-48MP | SG500X-48MP |
| SG300-28PP | SF302-08 | SG500-28 | SG500XG-8F8T |
| SF300-08 | SF300-24MP | SG500-28P | |
| SF300-48P | SG300-10SFP | SG500-28MPP | |
| SG300-10MP | SG300-28MP | SG500-52 | |
| SG300-10P | SG300-52P | SG500-52P | |
| SG300-10 | SG300-52MP | SG500-52MP | |
| SG300-28P | |||
| SF300-24P | |||
| SF302-08MP |
The settings should be like the following:
• Rate in bits per second = 115,200
• Data bits = 8
• Parity = None
• Stop bits = 1
• Flow control = None
