Skip to main content

πŸ” Full Guide To Create πŸ“‘FTP server On Your Pc πŸ”πŸ‘‡πŸ»πŸ‘‡πŸ»πŸ‘‡πŸ»

 Full Guide To Create FTP server On Your Pc 



 1'st Step - First of all You have to get an static IP-Address. 
Need a a static ip-address for ur FTP Server.Necessity for getting this static ip-address is ur not suppose to use ur own IP-Address.The main reason is u dont want to show ur IP-Address to everyone , there are many other reasons too but leave them aside..
1) Goto no-ip & create urself a free account.
2) Now ur account been created & ll receive ur account password via mail to ur email address.
3) After getting ur password login to ur account of no-ip.com
4.After getting logged in, click upon add a HOST its on the left menu.
5) Type any hostname u want (eg:-abc) & select any domain from da given list (eg:-ftpserve.com) Click on Submit.
6) Now u have owned ur own static address (example: abc.serveftp.com)
7) Now download the software of which operating system ur using & then download DNS update client
8) After getting downloaded, u have to install this software & login here with ur email addresss & p/w wen asked for it.
9) At last tick on da check box present at the static address.
10) U have ur own static web address.
⚙ 2nd Step - Installation & setting of the FTP-Server ⚙
1) You have to install Serv-U 4.1.03 , download this software from here
2) Run Serv-U & use da wizard to setup ur FTP.
3) Click on next until u have been asked for IP-Address, leave it as it is & click upon next.
4) Enter ur domain name u have registered (example: abc.serveftp.com) it above in da domain field & click upon next.
5) U ll be asked for anonymous access, select No & click upon next.
6) Next u ll be asked for creating a named account, select yes & click upon next.
7) Choose any user name u wish (eg:-xyz) & clcik upon next.
8) Enter password for dis account (eg:-adc341) for security purpose choose difficult password.
9) U ll be asked for da home directory for the account which u have created above.Select directory & click upon next.
10) Click on yes for locking dis account to da home directory, doing dis da user cannot further move up into home directory, click upon next.
11) At last ur account has been created click finish.
 Last Step :- Configuring the user accounts which u have been created 
1) On the left tree-menu, select da account which u have been created above & den click upon General Tab.
2) Goto Hide ‘Hidden’ Files.
3) Check Allow only and enter the number one in the box.
4) Set da maximum downloading speed upto wat extent u want.As this is an account so many ll be using so set it low(eg:-10-20) to save ur bandwidth.Don’t leave it blank as uers can download with full bandwidth.
5) choose how many users u want to login at on time.It depends on ur connection speed try these (56 – 1, ISDN – 3, ADSL or cable – 5-6 users.)
6) Click upon Dir Access Tab.
7) Now u can c home folder here.Highlight it & make ur permission.
8) If u want only users to download check only these Read,List & Inherit.
9) If u want ur users to upload into ur server & bu tto only 1 particular folder but not to downlaod, click upon dat add button & then select dat folder, Now u have to highlight dat folder & set these permissions on dat folder.Check,Write,Appened,List,Create & Inherit after setting these permissions click on the arrow which is present at the bottom right-hand corner.U want dis upload folder 2 be list first, before da home folder.
10) If der is any folder which u dont want anyone to access it, & it is present in the home folder, den click da add button & den select da folder.Now u have to highlight dat folder & see dat no all da checkboxes are left.After doing this click upon upper arrow which is present at bottom right hand corner.
11) There are many things u can do, These are only the basics….
12) Your server is now ready to be connected..
13) Login with your username and pass

Comments

Popular posts from this blog

Course Syllabus: Advanced Linux System Administration and Networking

Course Outline Advanced Linux System Administration and Networking
Introduction  LinkLinux FoundationLinux Foundation TrainingLaboratory ExercisesDistribution DetailsLinux Networking Concepts and ReviewOSI Model Introduction and Upper LayersOSI Model Transport LayerOSI Model Network LayerOSI Model Lower LayersNetwork TopologyDomain Name SystemSystem ServicesManaging System ServicesNetwork ConfigurationRuntime Network ConfigurationBoot Time Network ConfigurationIntro to OpenVPNNetwork Troubleshooting and MonitoringNetwork TroubleshootingClient-Side TroubleshootingServer-Side TroubleshootingNetwork MonitoringRemote AccessRemote Access HistoryIntro to CryptographySecure Remote AccessRemote GraphicsDomain Name ServiceOverview Of DNSBIND (named) ServerBIND Zone ConfigurationHTTP ServersApacheApache ConfigurationApache Virtual HostsApache SecurityAdvanced HTTP ServersMod RewriteMod AliasMod StatusMod IncludeMod PerlPerformance ConsiderationsEmail ServersEmail OverviewPostfixDovecotFile Shar…

Networking: HP Switches Firmware Downloads

Download all HP Switches Latest Firmware here:

https://h10145.www1.hp.com/Downloads/ProductsList.aspx?lang=en&cc=il&prodSeriesId=3963985

Please contact Techeia.com or comment below if you need any assistance to upgrade your firmware.



OR
Select your product link below:

HP Switch 2520-24-PoE(J9138A)
https://h10145.www1.hp.com/Downloads/SoftwareReleases.aspx?ProductNumber=J9138A&lang=en&cc=il&prodSeriesId=3963985

HP ProCurve 1810G - 24 GE PROCURVE J9450A
https://h10145.www1.hp.com/Downloads/SoftwareReleases.aspx?ProductNumber=J9450A&lang=en&cc=il&prodSeriesId=3963985


Other HP switch models included in the above link are:
JH103AHP FF 12916E Switch ChassisJH104AHP FF 12900E Main Processing UnitJH255AHP FF 12908E Switch ChassisJH262AHP FF 12904E Switch ChassisJH263AHP FF 12904E Main Processing UnitJD238CHP 7510 Switch ChassisJD239CHP 7506 Switch ChassisJD240CHP 7503 Switch ChassisJD242CHP 7502 Switch ChassisJH207AHP 7500 1.2T Fabric IRF-only MPUJH208AHP 7502 Ma…

Visio Stencils for Cisco Switches and Routers

This is to provide the direct link to download visio stencils of various cisco products. Please comment if you are unable to get the visio stencil for a specific product. We will update the stencils and provide you with a direct link.

Please use the Following links to download visio stencils for the Cisco Routers and Switches.

http://www.cisco.com/c/en/us/products/visio-stencil-listing.html

Application Networking Services


Application Control Engine-ACE XML Gateway (ZIP - 105 KB)  11/Jun/2008


Application Networking Services-Wide Area Application Engine (ZIP - 2 MB)  15/Jan/2008


Cisco WAAS (ZIP - 911 KB)  12/Jun/2012 Cisco Interfaces and Modules


Interfaces and Modules-HWIC (ZIP - 40 KB)  14/Jan/2008


Modules-Line Cards (ZIP - 1 MB)  21/May/2009


Modules-Network Modules (ZIP - 1 MB)  22/Aug/2003


Modules-Port Adaptors (ZIP - 674 KB)  08/Oct/2003


Modules-Shared Port Adapters(SPA) (ZIP - 2 MB)  18/Dec/2008


Modules-VICs (ZIP - 117 KB)  13/Mar/2003


Modules-WICs (ZIP - 94 KB)  12/Mar/2003


Power Systems - C…